Tests & certification

Testing & Certification

Rotor supplies different categories of inspection documents depending on Type reference as per EN 10204.
EN10204 Reference
Designation of document type
Document content
Document validated by
Type 2.1
Declaration of compliance with the order
Statement of compliance with the order
The manufacturer
Type 2.2
Test report
Statement of compliance with the order, with indication of results of nonspecific inspection
The manufacturer
Type 3.1
Inspection Certificate 3.1
Statement of compliance with the order, with indication of results of specific inspection
The manufacturer’s authorized inspection representative independent of the manufacturing department
Type 3.2
Inspection Certificate 3.2
Statement of compliance with the order, with indication of results of specific inspection
The manufacturer’s authorized inspection representative independent of the manufacturing department and either the purchasers authorized inspection representative or the inspector designated by the official regulations
An extended certification for the shaft material or cooler that serves as part of a critical application may be required in addition to inspection documents for marine motors. Specific inspection and approval process need to be followed for such cases. Please consult our experts for further information and support.
Tests & certification | Rotor

Rotor test facility

  • Rotor’s test facility at Eibergen is capable of different capacities for full load torque test up to 1 MegaWatt, with speeds ranging between 500 and 3600 rpm, voltages up to 13.8 kiloVolt.
  • Available test benches have 5, 50, 487, 2000 and 6400 Nm capacity with 160 percent overloading capacity for two minutes.
  • Maximum torque of 19.000 Nm for speeds up to 500 rpm.
  • Features include an online real time inspection system and online generation of the test report with live monitoring of temperature of winding and bearing.
  • Testing is carried out as per IEC60034-1 and IEC92.301. Rules of relevant Class Societies are followed.
  • Certificates are issued as per EN-10204, as such: 2.1, 2.2, 3.1, 3.2.
  • Special attention is provided for motors for essential services.
  • Testing is possible for water cooled motors. For underwater motor tests, special arrangements are possible.
  •  
  • Our test facility is also available for final customer inspections and acceptance tests by class societies.

Important technical data

  • Maximum testing capacity: 1 MW; 500-3600 rpm; up to 13.8kV, 50 /60Hz
  • Maximum torque: Approx. 19 kNm (14,000 lbf ft) for speed ranges up to 500 rpm
  • Voltage range: From 400 V up to 13.8 kV (higher voltages possible on demand)
  • Supply frequency-standard value: 50/60 Hz (Other frequency values on request)

Testing foundation

  • Fixing plate: 3 m x 3.5 m (9.9 ft x 11.5 ft) (slot T42)
  • Foundation weight: 900 metric tons with reduced resonance frequency (mounting independent from environmental infrastructure)
  • Water cooling system
  • Maximum re-cooling power of 1150 kW (depending on the application)
  • Adaptable water quantity and pressure, each configurable depending on the machines being tested
  • Able to supply machines being tested with a specific cooling water quality
Scroll to Top